Tie Rod Boots
 |
(A) Seals tight at tapered shaft
(B) Sharp edge helps seal-in lubricant
(C) Inside radius of boot works with rod socket as a wiper
(D) Extra sealing lips
(E) Barrel shaped for a better fit
|
| º |
|
Offers Superior Sealing & Protection. |
| º |
|
Saves Costly Tie Rod Ends From Premature Wear. |
| º |
|
Durable Material That Will Not Deteriorate. |
| º |
|
Lasts Longer Than O.E.M. Rubber Ones. |
| º |
|
Easy To Install With Common Tools. |
| º |
|
Made Of Our HYPER-FLEX™ Polyurethane. |
At last! It is now possible to replace a dust boot without having to buy a new tie rod! These HYPER-FLEX™ polyurethane boots resist damage from: rocks, sand, water, under vehicle oils, road contaminants, salt and ozone better than rubber ones.
Each boot features an important 5 point sealing action that prevents loss of lubricants and helps prevent contamination–the major cause of rod wear. Available in red or black.
TO MEASURE:
1) The rod end must measure at least the minimum dimensions shown below or larger. Approximates will do because of the elasticity of the product. The boot will seal better when it stretches over a larger dimension tie rod.
2) In some cases you need to insert a thin, not sharp, object under the lip of the boot to pull over area “B” of the tie rod end.
3) Remember, choose the part number (PN#) that has the dimensions closest to the vehicle’s, yet it must measure larger than the minimums in the diagram at the right. |
For applications not listed elseware in web catalog, use chart below.
(After part no.- add G for black, R for red.)
|
| Minimum O.D. Dimension |
Minimum O.D. Dimension |
Round |
Octagon |
|
Dimension A
|
Dimension B |
Part No. |
Part No. |
|
31/64" or .472" or 12mm
|
1 13/64" or 1.200" or 30.5mm
|
9.13103 |
9.13104 |
|
19/32" or .590" or 15mm
|
1 3/8" or 1.375" or 35mm
|
9.13101
|
9.13102
|
|
9/16" or .562" or 14mm
|
1 7/16" or 1.437" or 36.5mm
|
9.13105
|
9.13106
|
|
21/32" or .650" or 16.6mm
|
1 5/8" or 1.625" or 41.3mm
|
9.13119
|
9.13120
|
|
19/32” or .590” or 15mm
|
1 3/8” or 1.375" or 35mm
|
90.13101
|
--
|
|
21/32” or .650” or 16.6mm
|
1 5/8” or 1.625" or 41.3mm
|
90.13119
|
--
|
|
1 3/16” or 1.187” or 30mm
|
1 7/8” or 1.875" or 47mm
|
90.13127
|
--
|
Packaged 2 per peg board card- for resale and 12 and 50 per box for installers.
(After part no.- add G for black, R for red.)
|
|
2 Pack
|
12 Box |
50 Box |
|
9.13101
|
9.13107
|
9.13113 |
|
9.13102
|
9.13108
|
9.13114
|
|
9.13103
|
9.13109
|
9.13115
|
|
9.13104
|
9.13110
|
9.13116
|
|
9.13105
|
9.13111
|
9.13117
|
|
9.13106
|
9.13112
|
9.13118
|
|
9.13119
|
9.13121
|
9.13123
|
|
9.13120
|
9.13122
|
9.13124
|
|